Ring does not make its own garage door opener. To control a garage door through the Ring app, you need the Chamberlain Smart Garage Control (model MYQ-G0401 or the "Works with Ring" variant), which adds Wi-Fi and app control to most existing garage door openers made after 1993. Once set up, the device integrates with both the myQ app and the Ring app, letting you open, close, and monitor your garage door alongside your Ring cameras and doorbells.
Key takeaways:
-
Ring does not manufacture a garage door opener, the Chamberlain Smart Garage Control is the official Ring-compatible solution
-
The device works with most garage door openers manufactured after 1993 with standard safety sensors
-
Setup requires Wi-Fi (2.4 GHz), the myQ app, and a Ring account, then you link the two through the myQ app
-
Works with Amazon Key for in-garage delivery (US only)
-
Chamberlain has blocked third-party integrations with Google Home and HomeKit, only Ring and Amazon Key are officially supported as of 2026
Does Ring Make a Garage Door Opener?
Ring does not make its own garage door opener. Ring sells the Chamberlain Smart Garage Control through the Ring website and app ecosystem as its official garage integration device. It is manufactured by Chamberlain Group, the same company behind the myQ platform, and is marketed under the "Works with Ring" label.
If you search for a Ring garage door opener expecting a Ring-branded product, you will find the Chamberlain device, that is the intended product for this use case.
What Is the Chamberlain Smart Garage Control?
The Chamberlain Smart Garage Control (MYQ-G0401) is a retrofit device that adds smartphone control to an existing garage door opener.
It consists of a hub that mounts to the ceiling near your garage door opener and a door sensor that attaches to the garage door panel. Together, they let you monitor whether the door is open or closed in real time and trigger it remotely through an app.
Core specs:
-
Connectivity: Wi-Fi (2.4 GHz) and Bluetooth Low Energy (BLE)
-
Power: plugs into a standard 120V outlet near the opener
-
Dimensions: 2.6 × 2.6 × 0.8 inches
-
Operating temperature: −4°F to 149°F (−20°C to 65°C)
-
Compatible with most garage door openers manufactured after 1993 with standard safety sensors
-
Works with: Ring app, Amazon Key, myQ app
The "Works with Ring" version sold on ring.com and shop.ring.com is specifically configured for Ring integration. If you already own the standard myQ Smart Garage Control, the Ring linking process is the same, both versions connect through the myQ account.
Also read: About ring fire alarm
What You Need Before You Start
Before setting up the Chamberlain Smart Garage Control with Ring, confirm you have:
-
A compatible garage door opener, manufactured after 1993 with functioning safety sensors (the infrared sensors near the floor on each side of the door). Use the myQ Compatibility Tool on Chamberlain's website to check your specific model before purchasing.
-
Wi-Fi with 2.4 GHz band, the device does not support 5 GHz. If your router broadcasts dual-band, you may need to temporarily connect your phone to the 2.4 GHz network during setup.
-
The myQ app downloaded on your iOS or Android phone
-
A Ring account, free Ring account required; Ring Protect subscription is not required for garage integration
-
Stable signal, Chamberlain recommends 75% or better Wi-Fi signal strength when standing in the garage for reliable performance
Step-by-Step: How to Connect Chamberlain Smart Garage Control to Ring

Step 1: Install the Hardware
Mount the hub: Attach the Chamberlain Smart Garage Control hub to the ceiling of your garage, close enough to your garage door opener that you can plug it into a standard outlet. The hub communicates with the opener using radio frequency, it does not need to be physically wired to the opener, just powered and within range.
Attach the door sensor: Stick the magnetic door sensor to the top panel of your garage door using the included adhesive. The sensor monitors whether the door is open or closed and reports status to the hub. Ensure the sensor sits on a flat surface and the magnet aligns properly in the closed position.
Step 2: Set Up the myQ App
-
Download the myQ app (iOS or Android)
-
Create a Chamberlain/myQ account or sign in to an existing one
-
Tap Add Device and select Smart Garage Control
-
Follow the in-app instructions, the app uses Bluetooth Low Energy to detect the hub during setup, simplifying the Wi-Fi pairing process
-
Enter your 2.4 GHz Wi-Fi password when prompted
-
Once connected, your garage door should appear in the myQ app with real-time open/closed status
Test it: open and close the garage door from the myQ app to confirm the connection is working before proceeding to Ring.
Step 3: Link myQ to Ring
-
Open the Ring app on your phone
-
Tap the menu (≡) and go to Devices
-
Tap Set Up a Device, then select Smart Garage Door Controllers
-
Select Chamberlain / myQ
-
You will be redirected to authorize the connection, sign in to your myQ account and grant Ring permission to access your garage door
-
The garage door will now appear in your Ring app
Once linked, you can open, close, and check the status of your garage door directly from the Ring app, alongside your Ring cameras and doorbells.
Step 4: Configure Notifications
In the Ring app, go to your garage door device settings and enable Real-Time Alerts. You can configure notifications for:
-
Door opened
-
Door closed
-
Door left open (with a time threshold, the app will alert you if the door has been open for a set number of minutes)
These notifications come through the Ring app alongside your camera motion alerts and doorbell rings, keeping all your entry point alerts in one feed.
What the Ring Integration Actually Does, and What It Doesn't
Understanding what you get after setup prevents frustration later.
What works:
-
Open and close the garage door from the Ring app
-
Real-time open/closed status
-
Notifications when the door opens, closes, or is left open
-
The garage door appears as a device in your Ring dashboard alongside cameras and doorbells
-
Works with Amazon Key for in-garage package delivery (US only, requires Prime membership)
What doesn't work:
-
Alexa voice commands to open/close the garage (Amazon Key handles this for Prime users, but standard Alexa voice control is not included without the Amazon Key program)
-
Google Home or Apple HomeKit integration, Chamberlain has blocked both platforms as of 2025, and this has not changed in 2026
-
Ring Routines triggered by garage door events are limited, you cannot, for example, set a Ring camera to start recording when the garage opens without additional configuration
-
Ring Protect subscription is not required for basic garage control, but some advanced Ring features may require it
This is the most important context for anyone buying the Chamberlain Smart Garage Control specifically for smart home integration: as of 2026, Chamberlain's myQ platform officially supports Ring and Amazon Key only. Google Home, HomeKit, SmartThings, and most third-party platforms were blocked in late 2023, and Chamberlain has continued closing third-party access since then. If you want broad smart home ecosystem integration for your garage, the Chamberlain Smart Garage Control is not the right product, you would need a garage door opener with native Matter support or a different smart home approach.
For a deeper understanding of how smart home ecosystems and protocols work, and what "integration" actually means at the platform level, smart home hub vs smart home system: what's the difference? provides useful context before committing to any ecosystem.
Compatibility: Which Garage Door Openers Work With the Chamberlain Smart Garage Control?
The device works with most garage door openers manufactured after 1993 that have standard safety sensors, the infrared beam sensors near the floor on each side of the door.
Generally compatible:
-
Most Chamberlain and LiftMaster openers manufactured after 1993
-
Most Genie, Craftsman, Linear, and other major brand openers from the same era
-
Any opener with standard safety sensors (the door cannot function without them under current US safety code)
May not be compatible:
-
Some newer Chamberlain and LiftMaster openers with Security+ 2.0 technology, these have a built-in smart hub that may conflict with the Smart Garage Control. Check the compatibility tool before purchasing.
-
Very old openers (pre-1993) without safety sensors, these cannot be made compatible and should be replaced
-
Commercial-grade openers not designed for residential use
The compatibility check to run before buying: Chamberlain offers a free compatibility checker at chamberlain.com where you can enter your opener's model number and confirm compatibility. Do this before purchasing to avoid a return.
Troubleshooting Common Setup Issues
The myQ app can't find the device during Bluetooth setup: Make sure your phone's Bluetooth is on and you are standing within a few feet of the hub. Some phones require location permissions for Bluetooth to function, check your phone's app permissions for the myQ app.
Wi-Fi connection keeps failing: Confirm you are connecting to a 2.4 GHz network, not 5 GHz. If your router broadcasts a combined band, check your router settings to separate the two or temporarily create a 2.4 GHz-only network for setup.
Garage door status shows "unknown" in the app: The door sensor placement is the most common cause. Recheck that the sensor is adhered flat to the top panel and that the magnet aligns properly when the door is fully closed. A gap between sensor and magnet of more than a few millimeters can prevent reliable status reporting.
Ring app shows the garage but commands don't work: Try unlinking and relinking the myQ account in the Ring app. Go to Ring → Devices → your garage → Device Settings → unlink, then repeat the linking process from Step 3 above.
Real-time notifications not arriving: Check notification permissions for the Ring app on your phone. On iOS, go to Settings → Ring → Notifications and enable all alert types. On Android, notification permission varies by device and OS version.
Is a Ring Protect Subscription Required for the Garage Door?
No. Basic garage door control, opening, closing, status monitoring, and real-time notifications, does not require a Ring Protect subscription. The Chamberlain Smart Garage Control communicates through Chamberlain's myQ platform, which has its own separate subscription considerations.
myQ previously charged an annual fee for premium features; Chamberlain has changed this model multiple times. Check the current myQ app for any subscription requirements for advanced features like activity history beyond a certain number of events.
For a broader look at how subscription costs add up across smart home security devices, how on-device AI saves you $200+ a year covers how the architecture behind a system determines whether recurring fees are necessary at all.
Using Amazon Key With the Chamberlain and Ring Setup
Amazon Key for In-Garage Delivery is the most practical benefit of the Ring + Chamberlain combination for Prime members. When you opt in through the Amazon app, delivery drivers can open your garage, place packages inside, and close it, all without you being home. The garage door opens with a one-time delivery code and closes automatically when the driver leaves.
To set it up: link your myQ account to the Amazon Key program through the Amazon app → Key → In-Garage Delivery → Add Garage. Your Ring cameras and notifications remain active during the delivery window, so you see the driver's activity in real time.
This is the primary reason Amazon (Ring's parent company) maintains the official Chamberlain integration, it supports Amazon's logistics network. For package theft prevention beyond the garage, how to stop porch pirates: package theft prevention that actually works covers the full range of options for protecting deliveries.
What the Ring + Chamberlain Setup Doesn't Solve
The Ring and Chamberlain integration works well for what it is: remote garage monitoring and control within the Ring and Amazon ecosystem. What it doesn't provide is whole-home security coordination or AI-powered event intelligence.
Your Ring cameras notify you when motion is detected near your driveway. The Chamberlain device notifies you when the garage opens. Neither system, working together through the Ring app, classifies what it's seeing beyond basic motion detection, it doesn't distinguish between your teenager arriving home, a delivery driver who has authorization, and an unfamiliar vehicle that has entered your driveway and stopped.
For homeowners whose security setup has reached the limit of what Ring and myQ can offer, 10 signs your home security system is outdated provides a useful checklist for assessing where the gaps are.
Considering a More Integrated Home Security Setup?
If you want your garage, front door, cameras, and smart home devices all working together with AI intelligence rather than just remote control, OVAL by IRVINEi, hellooval.com is worth a look. OVAL is an AI Home Hub with on-device Edge AI, 11 contextual alert categories (visitor, package, intruder, weapon detection, and more), 3,000+ device integrations, and no cloud subscription required for core features, all in a single weatherproof device at your front door.
Conclusion
Connecting the Chamberlain Smart Garage Control to Ring is a straightforward two-part setup: install the hardware and configure the myQ app first, then link your myQ account to Ring through the Ring app's device settings. The integration gives you remote garage control and real-time notifications directly in the Ring app.
The key caveat to understand going in: Chamberlain's myQ platform is now a largely closed ecosystem. Ring and Amazon Key are the officially supported integrations. Google Home, HomeKit, and most third-party platforms are blocked. If broad smart home compatibility matters to you, or if you want your garage included in cross-platform automations, the Chamberlain Smart Garage Control is not designed for that use case, and the smart home controller: 7 best options for control, automation & security article covers alternatives that support broader integration.
Frequently Asked Questions
Does Ring make a garage door opener?
No. Ring does not manufacture its own garage door opener. Ring sells and supports the Chamberlain Smart Garage Control as the official Ring-compatible garage solution. It is made by Chamberlain Group and integrates with the Ring app through the myQ platform.
What garage door openers work with Ring?
The Chamberlain Smart Garage Control (MYQ-G0401) works with Ring and is compatible with most garage door openers manufactured after 1993 that have standard safety sensors. Check the myQ Compatibility Tool on Chamberlain's website to confirm your specific opener model before purchasing.
Do I need a Ring Protect subscription for garage control?
No. Basic open/close control and real-time notifications through the Ring app do not require a Ring Protect subscription. The device uses Chamberlain's myQ platform for core functionality, which operates independently of Ring's subscription tiers.
Does the Chamberlain Smart Garage Control work with Google Home or HomeKit?
No, as of 2026. Chamberlain blocked both Google Home and Apple HomeKit integration in late 2023 and has not restored access. The only officially supported smart home integrations are Ring and Amazon Key. Workarounds using third-party bridges exist but may conflict with Chamberlain's terms and are not officially supported.
How do I get notifications when my garage door is left open?
In the Ring app, go to your garage door device settings and enable real-time alerts. You can set a threshold, for example, receive a notification if the garage door has been open for more than 10 minutes. This alert comes through Ring alongside your camera and doorbell notifications.
Can I control two garage doors with one device?
One Smart Garage Control hub controls one garage door. For a second door, Chamberlain sells an additional door sensor (model MYQ-G0402) that pairs with the same hub. Confirm this add-on sensor is available and compatible with the version of the hub you purchase.
What if my garage door opener was made before 1993?
The Chamberlain Smart Garage Control requires an opener with standard safety sensors, which became mandatory under US safety regulations around 1993. Openers manufactured before that year typically lack these sensors and are not compatible. Replacing an opener of that age is advisable regardless, current models are significantly safer and more reliable.